WkImageButton

WkImageButtons provide a mechanism to initiate an action when clicked on. They call their activate callback when they are pressed and released. Image buttons may have an image and/or text string for a label. The image and text labels may be layed out either vertically or horizontally. Different images and labels can be specified for the up state, the pressed state and the disabled state.

Protocol

alignment: resourceValue
Sets the horizontal alignment for the widget's image.

 

click
Programatically click the button.

 

drawPolicy: anInteger
Specifies the drawing policy used in rendering buttons. The drawing policy determines two things for a button:

1. how the button draws itself so it looks like a button;
2. how the button animates when pressed.

Default: XmFLATDRAWPOLICY (Flat)

Valid resource values:

XmSHADOWEDTWOSTATEDRAWPOLICY (Shadowed Two State) - Buttons are drawn with a 3D shadowed outline and exhibit a simple 2-state (OFF and ON) state rendering.

XmSHADOWEDTHREESTATEDRAWPOLICY (Shadowed Three State) - Buttons are drawn with a 3D shadowed outline and exhibit a 3-state (OFF, ON, and PRESSED) state rendering.

XmOUTLINEDRAWPOLICY (Outlined) - Buttons are drawn with a simple etched (non-shadowed) outline and exhibit a 2-state (OFF and ON) state rendering.

XmFLATDRAWPOLICY (Flat) - Buttons are drawn flat without a 3D shadow.

 

horizontalAlignment: anInteger
Specifies the horizontal alignment for the widget's image.

Default: XmALIGNMENTBEGINNING (Left)

Valid resource values:

XmALIGNMENTBEGINNING (Left) - Causes the center of the image to be horizontally aligned with the left edge of the widget's window.

XmALIGNMENTCENTER (Center) - Causes the center of the image to be horizontally aligned in the center of the widget's window.

XmALIGNMENTEND (Right) - Causes the center of the image to be horizontally aligned with the right edge of the widget's window.

image: anImage
Set the image of the receiver.

 

labelInsensitivePixmap: anImage
Specifies the renderable object (image) which draws on the face of the widget when it is disabled.

 

labelInsensitiveString: aString
Specifies the renderable object (string) which draws on the face of the widget when it is disabled.

 

labelPressedPixmap: anImage
Specifies the renderable object (image) which draws on the face of the widget when it is pressed.

 

labelPressedString: aString
Specifies the renderable object (string) which draws on the face of the widget when it is pressed.

 

labelPixmap: anImage
Specifies the renderable object (image) which draws on the face of the widget.

 

labelString: aString
Specifies the renderable object (string) which draws on the face of the widget.

 

mnemonic: aCharacter
Provides the user with alternate means for selecting a button.

 

orientation: anInteger
Specifies whether the image and label are displayed vertically or horizontally.

Default: XmHORIZONTAL (Horizontal)

Valid resource values:

XmVERTICAL (Vertical) - Displays the image and label vertically.

XmHORIZONTAL (Horizontal) - Displays the image and label horizontally.

 

showAsDefault: anInteger
Specifies a shadow thickness for a second shadow to be drawn around the PushButton to visually mark it as a default button. When the resource is set to 0, the button appears as a normal button.

Default: 0 (Normal)

Valid resource values:

0 (Normal) - Causes the Button to look like a normal button

1 (Default) - Causes the Button to look like a default button

 

verticalAlignment: anInteger
Specifies the vertical alignment for the widget's image.

Default: XmALIGNMENTCENTER (Center)

Valid resource values:

XmALIGNMENTCENTER (Center) - Causes the center of the image to be vertically aligned in the center of the widget's window.

XmALIGNMENTTOP (Top) - Causes the top edge of the image to be vertically aligned with the top edge of the widget's window.

XmALIGNMENTBOTTOM (Bottom) - Causes the center of the image to be vertically aligned in the center of the widget's window.

Callbacks & Events

Activate Callback
These callbacks are triggered when the button has been activated. Buttons are activated when the mouse is clicked and released within the button. Buttons may also be activated via the space bar when the button has focus or via a carriage return when a button is a default button.

 

Arm Callback
These callbacks are triggered when the button is armed. Buttons are armed and appear pressed whenever the moused is pressed within the button and not yet released. If the mouse is moved outside of the button while still pressed, the button will be disarmed and appear unpressed. If the mouse is released while still in the button, the button is activated

 

Default Action Callback
These callbacks are triggered when the widget is double clicked.

 

Disarm Callback
These callbacks are triggered when the button is disarmed. Buttons are disarmed whenever the mouse is moved outside of the button after it has been armed. Moving the mouse back over the button while the mouse button is still down will cause the button to become rearmed.

Editor

Border Width
Specifies the width of the border that surrounds the widget’s window on all four sides. The width is specified in pixels. A width of zero means that no border will show.

Border - Causes the widget to have a border.

No Border - Causes the widget to have no border.

 

Draw Policy
Specifies the drawing policy used in rendering buttons. The drawing policy determines two things for a button:

1. how the button draws itself so it looks like a button;
2. how the button animates when pressed.

Shadowed Two State - Buttons are drawn with a 3D shadowed outline and exhibit a simple 2-state (OFF and ON) state rendering.

Shadowed Three State - Buttons are drawn with a 3D shadowed outline and exhibit a 3-state (OFF, ON, and PRESSED) state rendering.

Outlined - Buttons are drawn with a simple etched (non-shadowed) outline and exhibit a 2-state (OFF and ON) state rendering.

Flat - Buttons are drawn flat without a 3D shadow.

 

Enabled
Determines whether a widget will react to input events. Disabled (insensitive) widgets do not react to input events.

 

Horizontal Alignment
Specifies the horizontal alignment for the widget's image.

Left - Causes the center of the image to be horizontally aligned with the left edge of the widget's window.

Center - Causes the center of the image to be horizontally aligned in the center of the widget's window.

Right - Causes the center of the image to be horizontally aligned with the right edge of the widget's window.

 

Label - Default
Specifies the default label string.

 

Label - Pressed
Specifies the label string when the widget is pressed.

 

Label - Disabled
Specifies the label string when the widget is disabled.

 

Image - Default
Specifies the default label image.

 

Image - Pressed
Specifies the label image when the widget is pressed.

 

Image - Disabled
Specifies the label image when the widget is disabled.

 

Mnemonic
Provides the user with alternate means for selecting a button.

 

Orientation
Specifies whether the image and label are displayed vertically or horizontally.

Vertical - Displays the image and label vertically.

Horizontal - Displays the image and label horizontally.

Show As Default
Specifies a shadow thickness for a second shadow to be drawn around the PushButton to visually mark it as a default button. When the resource is set to 0, the button appears as a normal button.

Normal - Causes the Button to look like a normal button

Default - Causes the Button to look like a default button

Vertical Alignment
Specifies the vertical alignment for the widget's image.

Center - Causes the center of the image to be vertically aligned in the center of the widget's window.

Top - Causes the top edge of the image to be vertically aligned with the top edge of the widget's window.

Bottom - Causes the center of the image to be vertically aligned in the center of the widget's window.

 

Visible
Maps the widget (makes visible) as soon as it is both realized and managed, if set to True. If set to False, the client is responsible for mapping and unmapping the widget.

Example

The following example code creates a WkImageButton where the image is composed of an icon (from a file) and a text label laid out vertically. This corresponds to the upper left image at the start of the WkImageButton section.

aWkImageButton := WkImageButton

createWidget: 'aWkImageButton'

parent: self form

argBlock: [:w | w

x: 52;

y: 44;

width: 136;

height: 80;

image: (WbLabeledImage stateDriven

image: (WbIcon fromFile: 'BALLOON.ICO')

label: 'Balloon';

orientation: XmVERTICAL;

yourself);

scale].

The next example code creates a WkImageButton where the image is composed of an icon (from a file) and a text label laid out horizontally with a green background. This corresponds to the lower right image at the start of the WkImageButton section.

aWkImageButton := WkImageButton

createWidget: 'aWkImageButton'

parent: self form

argBlock: [:w | w

x: 52;

y: 44;

width: 136;

height: 80;

backgroundColor: (CgRGBColor

red: 16r0 green: 16rFFFF blue: 16r0);

image: (WbLabeledImage stateDriven

image: (WbIcon fromFile: 'BALLOON.ICO')

label: 'Balloon';

yourself);

orientation: XmHORIZONTAL;

scale].